Netgear RPS4000-200NES Datasheet download pdf (Page 7)

UPOE (Universal Power over Ethernet) provides up to

60W per port using 4 pairs while oering backward

compatilibity with 802.3af and 802.3at

• UPOE LLDP TLV, an 802.3 organizationally speciﬁc TLV, is fully supported for compatibility with UPOE

next-generation PD devices

• Additionally, a forced 4-pair high power static method is supported in CLI or Web GUI to enable the forced

4-pair conﬁguration

Large 10 Gigabit choice for uplinks with SFP+ ports for ﬁber or short, low-latency copper DAC cables; 10GBase-T ports for legacy Cat6 RJ45 short

connections (up to 50m) and Cat6A / Cat7 connections up to 100m

Automatic MDIX and Auto-negotiation on all ports select the right transmission modes (half or full duplex) as well as data transmission for crossover or straight-

through cables dynamically for the admin

IPv6 full support with IPv6 host, dual stack (IPv4 and IPv6), multicasting (MLD for IPv6 ﬁltering and PIM-SM / PIM-DM for IPv6 routing), ACLs and QoS, static

routing and dynamic routing (OSPFv3) as well as Conﬁgured 6to4 and Automatic 6to4 tunneling for IPv6 trac encapsulation into IPv4 packets

Ease of management and granular control

Distributed fabric technology simpliﬁes network

operations, bringing simplicity for maintenance,

upgrades and spare inventory management

•WheninsertedinSlot1,anyI/Obladewillhandlethesupervisoryrole

•WheninsertedinSlot2,anyI/Obladewillhandletheback-upsupervisoryrole

Dual ﬁrmware image and dual conﬁguration ﬁle for transparent ﬁrmware updates / conﬁguration changes with minimum service interruption

Flexible Port-Channel/LAG (802.3ad - 802.1AX) implementation for maximum compatibility, fault tolerance and load sharing with any type of Ethernet channeling from

other vendors switch, server or storage devices conforming to IEEE 802.3ad - including static (selectable hashing algorithms) - or to IEEE 802.1AX with dynamic

LAGs or port-channel (highly tunable LACP Link Aggregation Control Protocol )

Unidirectional Link Detection Protocol (UDLD) and Aggressive UDLD detect and avoid unidirectional links automatically, in order to prevent forwarding anomalies in a

Layer 2 communication channel in which a bi-directional link stops passing trac in one direction

Port names feature allows for descriptive names on all interfaces and better clarity in real word admin daily tasks

SDM (System Data Management, or switch

database) templates allow for granular system

resources distribution depending on IPv4 or

IPv6 applications:

• ARP Entries (the maximum number of entries in the IPv4 Address Resolution Protocol ARP cache for

routing interfaces)

• IPv4 Unicast Routes (the maximum number of IPv4 unicast forwarding table entries)

• IPv6 NDP Entries (the maximum number of IPv6 Neighbor Discovery Protocol NDP cache entries)

• IPv6 Unicast Routes (the maximum number of IPv6 unicast forwarding table entries)

• ECMP Next Hops (the maximum number of next hops that can be installed in the IPv4 and IPv6 unicast

forwarding tables)

• IPv4 Multicast Routes (the maximum number of IPv4 multicast forwarding table entries)

• IPv6 Multicast Routes (the maximum number of IPv6 multicast forwarding table entries)

Loopback interfaces management for routing protocols administration

Private VLANs and local Proxy ARP help reduce broadcast with added security

Management VLAN ID is user selectable for best convenience

Industry-standard VLAN management in the command line interface (CLI) for all common operations such as VLAN creation; VLAN names; VLAN "make static" for dy-

namically created VLAN by GRVP registration; VLAN trunking; VLAN participation as well as VLAN ID (PVID) and VLAN tagging for one interface, a group of interfaces

or all interfaces at once

System defaults automatically set per-port broadcast, multicast, and unicast storm control for typical, robust protection against DoS attacks and faulty clients which

can, with BYOD, oen create network and performance issues

IP Telephony administration is simpliﬁed with consistent Voice VLAN capabilities per the industry standards and automatic functions associated

Comprehensive set of "system utilities" and "Clear" commands help troubleshoot connectivity issues and restore various conﬁgurations to their factory defaults for

maximum admin eciency: traceroute (to discover the routes that packets actually take when traveling on a hop-by-hop basis and with a synchronous response

when initiated from the CLI), clear dynamically learned MAC addresses, counters, IGMP snooping table entries from the Multicast forwarding database etc...

All major centralized soware distribution platforms are supported for central soware upgrades and conﬁguration ﬁles management (HTTP, TFTP), including in highly

secured versions (HTTPS, SFTP, SCP)

Simple Network Time Protocol (SNTP) can be used to synchronize network resources and for adaptation of NTP, and can provide synchronized network timestamp

either in broadcast or unicast mode (SNTP client implemented over UDP - port 123)

Embedded RMON (4 groups) and sFlow agents permit external network trac analysis

ProSAFE® LAN Access and Aggregation Chassis Switches Data Sheet

M6100 series

Page 7 of 46

1 2 3 4 5 6 7 8 9 10 11 12 ... 45 46

Comments to this Manuals

No comments

Netgear RPS4000-200NES Datasheet Page 7

Comments to this Manuals