Netgear GA620 Installation Guide Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 13
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
Model GA620 Gigabit Ethernet Card Installation Guide for Windows NT
1. Turn the power off and unplug the power cord from your computer.
2. Remove the PC cover.
3. Choose an available PCI slot (either a 32-bit or a 64-bit slot) and
remove the corresponding back plate from the PC chassis.
4. Insert the card into the PCI expansion slot.
5. Fasten the card to the rear of the computer chassis by tightening the
screw that is on the PC.
6. Replace the PC cover and reconnect the power cord to the PC.
Note: Touch a grounded metal object to free yourself of static
electricity before you handle the card.
Note: To avoid damaging any components on the card, handle it by the
edges, using your thumbs to push it securely into the PCI slot. Make
sure the card is fully inserted into the slot to prevent the PC operating
system from freezing at startup.
If you are inserting the card into a 32-bit slot, part of the connector
edge on the card remains undocked. This situation is normal and does
not affect the operation of the card.
Install the Card
Network card
Back plate
removed
7983FB
Page view 3
1 2 3 4 5 6 7 8 9 ... 12 13

Comments to this Manuals

No comments