Netgear FS 750 User Manual download pdf (Page 39)

B-1connector pin assignments

APPENDIX B: CONNECTOR PIN ASSIGNMENTS

This appendix provides information about the RJ-45 plug and the RJ-45 connector used

for the NETGEAR FS726 and FS750 Switches.

RJ-45 Plug and RJ-45 Connector

In a Fast Ethernet network, it is important that all 100BASE-T certified Category 5

cabling use RJ-45 plugs.The RJ-45 plug accepts 4-pair UTP or shielded twisted-pair

(STP) 100 ohm cable and connects into the RJ-45 connector.The RJ-45 connector is

used to connect stations, hubs, and switches through UTP cable; it supports 10 Mbps,

100 Mbps, or 1000 Mbps data transmission.

Figure B-1 shows the RJ-45 plug and RJ-45 connector.

Figure B-1.RJ-45 Plug and RJ-45 Connector with Built-in LEDs

Key:

1 to 8 = pin numbers

711EA

12345678

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 51 52

No comments

Netgear FS 750 User Manual Page 39