InstallationN600 WiFi Range ExtenderModel WN3500RP
103. Select a 2.4 GHz WiFi network to extend and click the Continue button.4. Type the network password (also called passphrase or security key) in
11The settings are applied and the following screen displays.On iPads, iPhones, and MacBook computers, this screen automatically closes. 8. Use a WiF
12A message displays confirming that the extender is connected to the WiFi network.10. Click the Finish button.11. Unplug the extender and move it t
13Connect an Ethernet-Enabled DeviceAfter the extender is connected to your existing WiFi network, you can connect a wired device to the extender usin
14Log In to Access Extender SettingsAfter installation, you can log in to the extender to view or change the extender’s settings. 1. Use a WiFi netwo
15Frequently Asked QuestionsYou can find more information about your product in the user manual, which is available at http://support.netgear.com.The
16My router security is WEP, and I entered the wrong passphrase or security key on the extender. I cannot access the extender anymore. What can I do?T
17I completed the Installation Wizard, but my WiFi device is unable to get an IP address from the extender. What should I do?Make sure that the passwo
18I enabled a wireless MAC filter, wireless access control, or access list (ACL) on my router. What should I do when installing the extender?When the
19A login screen displays.c. Enter admin for the user name and password for the password.5. Select Maintenance > Attached Devices.The Attached De
2Getting StartedThe NETGEAR WiFi Range Extender increases the distance of a WiFi network by boosting the existing WiFi signal and enhancing the overal
September 2014NETGEAR, Inc.350 East Plumeria DriveSan Jose, CA 95134, USASupportThank you for purchasing this NETGEAR product. After installing your d
3Meet Your ExtenderBefore you install your extender, familiarize yourself with its LEDs, buttons, and port.LEDsButtons and PortsPower LED2.4 GHz Link
4LED DescriptionsPower LED Solid amber. The extender is booting.Solid green. The extender is powered on.O. The extender is powered o.2.4 GHz Link Ra
5Install the WiFi ExtenderPrepare the extender, place the extender, apply power, and connect it to your WiFi network.Prepare the ExtenderYou can use t
6Place the Extender and Apply Power1. Place your extender in the same room as your WiFi router.Proximity to the WiFi router is required only during t
7Connect with WPSWi-Fi Protected Setup (WPS) lets you join a secure WiFi network without typing the network name and password. Note: WPS does not sup
8The extender’s wireless network name (SSID) changes to your existing WiFi network name, with _2GEXT or _5GEXT at the end of the name, depending on wh
9Connect with Web Browser Setup1. Use a WiFi network manager on a computer or WiFi device to find and connect to the NETGEAR_EXT (SSID) WiFi network.
Comments to this Manuals