Factory Settings and Technical Specifications
48
N300 WiFi Range Extender
Factory Default Settings
To reset the extender to factory default settings, you can use either the Factory Reset button
on the side panel or you can log in to the extender and use its ERASE feature. For more
information, see Return the Extender to Its Factory Default Settings on page 37.
The following table shows the factory default settings.
Table 2. Factory default settings
Feature Default Settings
Smart Setup Enabled
WiFi communication Enabled
WiFi network name (SSID) NETGEAR_EXT
Security Disabled
Transmission speed Auto
1
1. Maximum WiFi signal rate (IEEE Standard 802.11). Actual throughput can vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network
overhead lower actual data throughput rate.
Country/region Varies by region
Operating mode 802.11b/g/n
Data rate in the 2.4 GHz band Up to 300 Mbps
DHCP Client enabled
Technical and Environmental Specifications
The following table shows the technical and environmental specifications.
Table 3. Technical specifications
Technical Specifications
Network protocol and
standards compatibility
Data and routing protocols: TCP/IP, DHCP server and client, DNS relay, NAT
(many-to-one), VPN pass-through (IPSec, PPTP)
Physical specifications • Dimensions: 14 x 55 x 32.5 mm (0.55 x 2.17 x 1.28 in.)
• W
eight: 175 g (6.17 oz)
Environmental • Operating temperature: 32° to 140°F (0° to 40°C)
• Operating humidity: 90% maximum relative humidity
, noncondensing
Interface • Local: 10BASE-T
, 100BASE-TX, 1000BASE-TX, RJ-45
• 802.1
1n, 802.11g, 802.11b
Comments to this Manuals