Netgear WN3100RPv2 Installation Guide download pdf (Page 16)

My router security is WEP, and I entered the wrong passphrase

or security key on the extender. I cannot access the extender

anymore. What can I do?

The extender cannot check to see if the WEP passphrase is correct. If you

entered the wrong passphrase, your wireless device is not able to get the

IP address from the extender. You must reset the extender to its factory

default settings to get the IP address back.

How do I restore the extender to its factory default settings?

1. Use a sharp object such as a pen or paper clip to press and hold the

Factory Reset button on the extender for at least ﬁve seconds until

the Power LED lights amber.

2. Release the Factory Reset button and wait for the extender to

reboot.

The extender resets and returns to the factory default settings.

Can I set up the extender in extender mode if I connect it to the

router or access point with an Ethernet cable?

No. The extender is designed to connect wirelessly to the router or access

point if it is in extender mode. If the extender is in access point mode, you

can connect it to the router or access point with an Ethernet connection.

For more information about access point mode, see Use the Extender in

Access Point Mode on page 12.

1 2 ... 11 12 13 14 15 16 17 18 19 20

No comments

Netgear WN3100RPv2 Installation Guide Page 16