Netgear WN3100RPv2 Installation Guide download pdf (Page 12)

Use the Extender in Access Point Mode

You can use the extender as a WiFi access point, which creates a new WiFi

hotspot by using a wired Ethernet connection.

1. Plug the extender into an electrical outlet.

Wait for the Power LED to light amber and turn green. If the

Power LED does not light, slide the Device On/O switch on the side

of the extender to the On position.

2. Use an Ethernet cable to connect the extender to the router Ethernet

LAN port or the remote Ethernet LAN jack with LAN access.

The extender joins the LAN and creates a WiFi hotspot.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Netgear WN3100RPv2 Installation Guide Page 12