Netgear WN3100RP Installation Guide

InstallationN300 WiFi Range ExtenderModel WN3100RP

103. Select a WiFi network to extend and click the Continue button.The following screen displays:4. Type the network password (also called passphras

115. In the Name field, type the name (SSID) for your new extender WiFi network and click the Continue button.You can use the same security settings a

127. If the screen is still displayed on your computer or WiFi device, select the check box at the bottom of the screen and click the Continue button

13Find the Best LocationIf the WiFi signal is weak, the first time you join the extender network, an arrow LED blinks for two minutes. If this happens,

14Connect an Ethernet-Enabled DeviceAer the extender is connected to your existing WiFi network, you can connect a wired device to the extender using

15Log In to Access Extender SettingsAer installation, you can log in to the extender to view or change the extender’s settings. 1. Use a WiFi networ

16Frequently Asked QuestionsYou can find more information about your product in the user manual, which is available at http://support.netgear.com.The w

17How do I restore the extender to its factory default settings?1. Use a sharp object such as a pen or paper clip to press and hold the Factory Reset

18I enabled a wireless MAC filter, wireless access control, or access control list (ACL) on my router. What should I do when installing the extender?Wh

19A login screen displays.c. Enter admin for the user name and password for the password. 5. Select Maintenance > Attached Devices.The Attached D

2Getting StartedThe NETGEAR WiFi Range Extender increases the distance of a WiFi network by boosting the existing WiFi signal and enhancing the overal

September 2014NETGEAR, Inc.350 East Plumeria DriveSan Jose, CA 95134, USASupportThank you for purchasing this NETGEAR product. After installing your d

3Meet Your ExtenderBefore you install your extender, familiarize yourself with its LEDs, buttons, and port.Front and Right Side PanelsRouter Arrow LED

4Rear and Le Side PanelsFactory Reset buttonWPS buttonDevice On/O switchProduct labelPower connector(varies by region)

5LED DescriptionsRouter Link LEDThis LED indicates the connection between the extender andthe router or access point.Solid green. Best connection.Soli

6Install the WiFi ExtenderPlace the extender, apply power, and connect it to your WiFi network.Place the Extender and Apply Power1. Place your extend

7Connect with WPSWi-Fi Protected Setup (WPS) lets you join a secure WiFi network without typing the network name and password. Note: WPS does not sup

84. Connect your computer or WiFi devices to the new extended WiFi network.Use the same WiFi password that you use for your WiFi router.5. Unplug th

9Connect with Web Browser Setup1. Use a WiFi network manager on a computer or WiFi device to find and connect to the NETGEAR_EXT (SSID) WiFi network.A