Netgear Home Router User Manual download pdf (Page 2)

August 2004

NETGEAR is a registered trademark of NETGEAR, Inc. in the

United States and/or other countries.

Other brand and product names are trademarks or registered

trademarks of their respective holders. Information is subject to

change without notice.

I am an advanced user, can I

bypass the setup wizard?

To bypass the wizards, connect the router, log in from

a DHCP enabled (IP & DNS) computer at

http://www.routerlogin.net/basicsetting.htm with

the user name of admin and the password of

password, both in lower case letters.

Troubleshooting Tips

Here are some tips for correcting simple problems

you may have.

Once the router is connected, always

restart your network in this sequence:

1. Unplug and turn off the modem, turn off the

router, and shut down the computer.

2. Turn on the modem and wait two minutes.

3. Turn on the router and wait 1 minute.

4. Turn on the computer.

Make sure the cables are plugged in.

• The router Internet status light will be lit if the

Ethernet cable from the router to the modem is

plugged in securely and the modem and router

are turned on.

• For each powered on computer connected to the

router with an Ethernet cable, the corresponding

LAN status light will be lit. The label on the

bottom of the router identifies the number of each

LAN port.

Make sure the network settings of the

computer are correct.

Computers connected to the router must be configured

to obtain IP and DNS addresses automatically via

DHCP. For help with this, please see the tutorials on

the CD.

Check the router status lights to verify

correct router operation.

The Power light should turn solid green. If after 2

minutes it is not, reset the router as described in the

Setup Manual on the CD.

I don’t have a working CD drive.

Go to http://www.NETGEAR.com and download the

manual for your product from the support area of the

Web site. Follow the setup instructions in the manual.

Technical Support

Thank you for selecting NETGEAR products.

After completing the Smart Wizard configuration

assistant, locate the serial number on the bottom label

of your product and use it to register your product at

http://www.NETGEAR.com/register.

Registration on the web site or over the phone is

required before you can use our telephone support

service. The phone numbers for worldwide regional

customer support centers are on the Warranty and

Support Information card that came with your

product.

Go to http://kbserver.netgear.com for product

updates and web support.

1 2

Comments to this Manuals

No comments

Netgear Home Router User Manual Page 2

Comments to this Manuals