Netgear DM111P User Manual Page 43

  • Download
  • Add to my manuals
  • Print
  • Page
    / 50
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 42
DM111P ADSL2+ Ethernet Modem Reference Manual
Troubleshooting 4-5
v1.1, September 2006
Make sure you are using the correct login information. The factory default login name is
admin and the password is password. Make sure that CAPS LOCK is off when entering this
information.
If the modem does not save changes you have made in the Web Management Interface, check the
following:
When entering configuration settings, be sure to click the APPLY button before moving to
another menu or tab, or your changes are lost.
Click the Refresh or Reload button in the Web browser. The changes may have occurred, but
the Web browser may be caching the old configuration.
Troubleshooting the Internet Connection
If your computer is connected to your modem via a router, disconnect the router and directly
connect the computer to the modem. If you now have Internet access, use the docomentation that
came with the router to perform re-installation and troubleshooting.
If your modem is unable to access the internet, but your Internet LED is green or blinking green,
you should determine whether the modem is able to obtain an IP address from the ISP. Unless you
have been assigned a static IP address, your modem must request an IP address from the ISP. You
can determine whether the request was successful using the browser interface.
To check the WAN IP address from the browser interface:
1. Launch your browser and select an external site such as www.netgear.com.
2. Access the management interface of the modem using your browser. For details, see “Opening
the Web-Based Modem Management Utility” on page 2-4.
3. Under the Maintenance heading select Modem Status. Check that an IP address is shown for
the ADSL port. If 0.0.0.0 is shown, your modem has not obtained an IP address from your ISP.
If your modem is unable to obtain an IP address from the ISP, check your
Your ISP may require a Multiplexing Method or Virtual Path Identifier/Virtual Channel
Identifier parameter.
Verify with your ISP the Multiplexing Method and parameter value, and update the routers
ADSL Settings accordingly.
If your ISP requires PPP over Ethernet (PPPoE) or PPP over ATM (PPPOA), check that your
login credentials are correct.
Page view 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 49 50

Comments to this Manuals

No comments