Netgear DM111P User Manual Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 50
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
DM111P ADSL2+ Ethernet Modem Reference Manual
Connecting to the Internet 2-3
v1.1, September 2006
Using ADSL Microfilters with Built-In Splitters. Use an ADSL microfilter with built-in
splitter when there is a single wall outlet that must provide connectivity for both the modem and
telephone equipment.
Connecting your Modem to your Computer
Before starting the utility, physically connect the modem as follows:
1. Connect the yellow Ethernet cable between the yellow Ethernet port on the modem and the
Ethernet port on your PC.
2. Connect the ADSL port on your modem to your telephone jack.
Figure 2-2
Note: If you intend to connect to a router, do so after you have successfully obtained
an Internet connection when your modem is directly connected to the PC.
Refer to the documentation that came with the router for its installation
instructions.
Figure 2-3
Phone
ADSL
Line
Telephone Jack
DM111 ADSL2+ Ethernet Modem
PC Ethernet Port
Page view 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 49 50

Comments to this Manuals

No comments