Netgear DM111P User Manual download pdf (Page 17)

DM111P ADSL2+ Ethernet Modem Reference Manual

Introduction 1-5

v1.1, September 2006

The Modem’s Front Panel

The DM111P ADSL2+ Ethernet Modem front panel shown below contains status LEDs.

You can use the LEDs to verify various conditions. Table 1-1 lists and describes each LED on the

front panel of the modem. These LEDs are green when lit.

Figure 1-1

Table 1-1. LED Descriptions

Label Activity Description

1. Power

Solid On (Green)

Blinking (Green)

Solid On (Red)

Off

Power is supplied and the modem in its normal operating mode.

Firmware update is in progress

Self test is in progress or self-test failed

Power is not supplied to the modem.

2. LAN

Solid On (Green)

Off

A device is connected to the yellow Ethernet port.

No device is connected to the yellow Ethernet port.

3. ADSL

Solid On (Green)

Blinking (Green)

Off

The modem is synchronized with your service provider’s DSLAM.

The modem is synchronizing with your service provider;s DSLAM.

No ADSL link detected.

4. Internet

Solid On (Green)

Off

Internet connection is active.

Modem is powered off, or is in bridged mode, or there is no ADSL

connection.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 49 50

No comments

Netgear DM111P User Manual Page 17