Netgear RT338 User Manual Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 11
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
Model RT338 ISDN Router Installation Guide
Verifying TCP/IP Properties
After your PC has been congured and rebooted, check the TCP/IP
conguration using the Windows 95 and Windows 98 utility
winipcfg.exe
. For
Windows NT systems, use
ipconfig.exe
.
To check the TCP/IP conguration:
1. From Start, select Run.
2. Type winipcfg (or ipconfig for Windows NT).
3. Click on OK.
The IP Conguration window opens.
4. In the IP configuration window, select your Ethernet adapter.
5. Verify the following:
IP address is set at between 192.168.0.2 and 192.168.0.31.
Subnet mask is set at 255.255.255.0.
Default gateway is set at 192.168.0.1.
6. Click on More Info.
7. Verify that the DNS server is set to 192.168.0.1.
To congure your router, you will use the FirstGear
conguration software
that is provided on the
Model RT338 Resources
CD.
To install and run FirstGear:
1. Insert the NETGEAR
Model RT338 Resources
CD.
2. From the Windows taskbar, open Start > Run.
3. Click on Browse.
4. Find and select the Setup.exe program on the CD.
5. Click on OK.
6. Follow the setup instructions to install the program.
7. Double-click on the FirstGear icon that should now be visible on your
desktop.
Make sure the router is connected and has been on for at least one minute
before launching FirstGear. If the password has been changed from the
default of 1234, enter a new password.
8. Enter your ISDN information.
Be sure to enter your directory numbers in the local format. Do not enter the
area code unless it is required for local dialing.
9. Click on Next.
Configuring the Router
Page view 6
1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments