Netgear RT338 User Manual download pdf (Page 6)

Model RT338 ISDN Router Installation Guide

Conﬁguring Windows 95 or Windows 98 for IP Networking

All PCs must have an Ethernet adapter card installed and TCP/IP as their

protocol. TCP/IP installation must be done manually.

To conﬁgure Windows 95 or Windows 98 for IP networking:

• Select the network properties from the Windows Control Panel.

Find your Ethernet adapter, TCP/IP protocol, and Client for Microsoft

Networks. If these do not exist, you must add them.

To add an Ethernet adapter:

a. Click on Add.

b. Select Adapter.

c. Click on Add (again).

d. Select the manufacturer and model for the Ethernet adapter.

e. Click on OK.

To add TCP/IP:

a. Click on Add.

b. Click on Protocol.

c. Click on Add (again).

d. Select Microsoft.

e. Select TCP/IP.

f. Click on OK.

To add a Client for Microsoft Networks:

a. Click on Add.

b. Click on Client.

c. Click on Add (again).

d. Select Microsoft.

e. Select Client for Microsoft Networks.

f. Click on OK.

Restart your PC after making these changes.

Conﬁguring TCP/IP Properties

NETGEAR recommends that you keep the default settings for the TCP/IP setup

parameters, because your PC is conﬁgured to obtain its TCP/IP conﬁguration

information from a DHCP server on the LAN. The Model RT338 router is

shipped preconﬁgured as a DHCP server and assigns the TCP/IP conﬁguration.

To obtain the conﬁguration information from the router:

1. Turn on power to the router.

Wait at least one minute before continuing to step 2.

2. Reboot each PC on your LAN.

Configuring the PCs

1 2 3 4 5 6 7 8 9 10 11

No comments

Netgear RT338 User Manual Page 6