Netgear RM356 User Manual download pdf (Page 7)

Model RM356 Modem Router Installation Guide

Configuring TCP/IP Properties Manually

If you choose not to configure your PC by DHCP, you must manually enter the following

information in the TCP/IP Properties section of the Network Control Panel of your PC:

• IP address and subnet mask (choose from your assigned IP addresses or private IP addresses)

• Gateway (enter the IP address of the router)

• DNS server addresses (enter IP addresses provided by your ISP)

Verifying TCP/IP Properties

After your PC has been configured and rebooted, you can check the TCP/IP configuration using

the Windows utility winipcfg.exe (for Windows NT

systems, use ipconfig.exe). From the “Start”

button, open the Run window, type winipcfg, and click on “OK.”

Note: In addition to displaying the current TCP/IP properties, the winipcfg utility allows

you to release and renew DHCP-assigned information without rebooting the PC.

1 2 3 4 5 6 7 8 9 10 11

No comments

Netgear RM356 User Manual Page 7