Netgear 771S User Manual download pdf (Page 16)

AirCard 77Xs/34xU AT Command Reference

16 Proprietary and Confidential 4114487

Command reference

Table 3-2: Modem status, customization, and reset commands

Command Description

!BAND

Note: The ‘Basic’ command

and response versions are

used if you haven’t entered the

required password. (See

Command access on page 7.)

Select/return frequency band set

Configure the modem to operate on a set of frequency bands, look up available sets,

create new sets, or return the current selection.

Password required: Yes—Execution (Extended) format

Usage:

• Execution (Basic):

AT!BAND=<Index>

Response:

Purpose: Select an existing set of bands.

• Execution (Extended):

AT!BAND=<Index>,”<Name>”,<GWmask>[,<Lmask>,<Lmask2>]

Response:

Purpose: Create a new set of bands.

• Query: AT!BAND?

Response:

Index, Name[, GW Band Mask [, L Band Mask]]

<Index>, <Name>[, <GWmask> [, <Lmask>]]

or (If the current band mask doesn’t match a band set)

Unknown band mask. Use AT!BAND to set band.

<Index>

Purpose: Report the current band selection. (<GWmask> and <Lmask> may

only appear in Extended responses.)

• Query List: AT!BAND=?

Response:

Index, Name[, GW Band Mask [ L Band Mask]]

<Index1>, <Name1>[, <GWmask1> [, <Lmask1>]]

...

<IndexN>, <NameN>[, <GWmaskN> [, <LmaskN>]]

Purpose: Display allowed <Index> values and descriptions of the associated

band sets.

(Continued on next page)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 59 60

No comments

Netgear 771S User Manual Page 16