Netgear Computer Hardware 5200 User Manual download pdf (Page 31)

Maintenance

NETGEAR ReadyDATA 5200

WARNING:

Ensure that the chassis cover is in place when the system is

operating to allow proper cooling. Out-of-warranty damage to the

system can occur if you do not strictly follow this practice.

Fan

If a fan fails, the remaining fans increase to full speed, the information LED on the control

panel illuminates, and an email alert is sent to the system administrator. Replace a failed fan

as soon as possible. Remove the top chassis cover while the system is still running to

determine which fan failed.

Fans are hot-swappable, so you do not need to power down your unit when replacing a fan.

 To replace a fan:

1. Remove the c

hassis cover.

For more information, see System Interior on p

age 30.

2. Press the t

abs on the sides of the fan to unlock and remove the fan and its housing.

The fan’s power connection automatically detaches.

3. Repla

ce the failed fan with an identical fan.

You hear a click when the fan is fully installed and the power connections are made. If the

system power is on, the hot-plug feature causes the fan to start immediately upon being

connected to its header on the mainboard.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 37 38

No comments

Netgear Computer Hardware 5200 User Manual Page 31