Netgear Double 108 Mbps Wireless PC Card WG511U User Manual download pdf (Page 79)

User’s Manual for the NETGEAR Double 108 Mbps Wireless PC Card 32-bit CardBus WG511U

Preparing Your PCs for Network Access C-5

August 2004

Selecting Windows’ Internet Access Method

1. On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.

2. Double-click the Internet Options icon.

3. Select “I want to set up my Internet connection manually” or “I want to connect through a

Local Area Network” and click Next.

4. Select “I want to connect through a Local Area Network” and click Next.

5. Uncheck all boxes in the LAN Internet Configuration screen and click Next.

6. Proceed to the end of the Wizard.

Verifying TCP/IP Properties

After your PC is configured and has rebooted, you can check the TCP/IP configuration using the

utility winipcfg.exe:

1. On the Windows taskbar, click the Start button, and then click Run.

By default, the IP Address tab is open on

this window.

• Verify the following:

Obtain an IP address automatically is

selected. If not selected, click in the

radio button to the left of it to select it.

This setting is required to enable the

DHCP server to automatically assign an

IP address.

• Click OK to continue.

Restart the PC.

Repeat these steps for each PC with this

version of Windows on your network.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 94 95

No comments

Netgear Double 108 Mbps Wireless PC Card WG511U User Manual Page 79