Netgear Double 108 Mbps Wireless PC Card WG511U User Manual download pdf (Page 75)

Preparing Your PCs for Network Access C-1

August 2004

Appendix C

Preparing Your PCs for Network Access

This appendix describes how to prepare your PCs to connect to the Internet through the

NETGEAR Double 108 Mbps Wireless PC Card 32-bit CardBus WG511U.

For adding file and print sharing to your network, please consult the Windows help information

included with the version of Windows installed on each computer on your network.

Preparing Your Computers for TCP/IP Networking

Computers access the Internet using a protocol called TCP/IP (Transmission Control Protocol/

Internet Protocol). Each computer on your network must have TCP/IP installed and selected as its

networking protocol. If a Network Interface Card (NIC) is already installed in your PC, then TCP/

IP is probably already installed as well.

Most operating systems includes the software components you need for networking with TCP/IP.

Windows 95 or later includes the software components for establishing a TCP/IP network.

In your TCP/IP network, each PC and the wireless access point must be assigned a unique IP

addresses. Each PC must also have certain other TCP/IP configuration information such as a

subnet mask (netmask), a domain name server (DNS) address, and a default gateway address. In

most cases, you should install TCP/IP so that the PC obtains its specific network configuration

information automatically from a DHCP server during startup.

Configuring Windows 98 and Me for TCP/IP Networking

As part of the PC preparation process, you may need to install and configure

TCP/IP on your PC. Before starting, locate your Windows CD; you may need to insert it during the

TCP/IP installation process.

Install or Verify Windows Networking Components

To install or verify the necessary components for IP networking:

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 94 95

No comments

Netgear Double 108 Mbps Wireless PC Card WG511U User Manual Page 75