Netgear Double 108 Mbps Wireless PC Card WG511U User Manual Page 48

  • Download
  • Add to my manuals
  • Print
  • Page
    / 95
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 47
User’s Manual for the NETGEAR Double 108 Mbps Wireless PC Card 32-bit CardBus WG511U
5-6 Wireless Security Configuration
August 2004
WPA-PSK Security Settings Worksheet
Print this form, fill in the configuration parameters and put it in a safe place for possible future
reference. For an existing wireless network, the person who set up the network will be able to
provide this information.
Wireless Network Name (SSID)
The Service Set Identification (SSID) identifies the wireless local area network.
Note
: Some wireless access points will not broadcast their SSID as a security feature. In such
a case, you will need to get the SSID from the wireless network administrator.
Wireless network name (SSID): ______________________________
Passphrase (Pre-Shared Key): ________________________________________
How to Configure WPA-PSK Advanced Security
Follow the steps below to configure WPA-PSK Advanced Security.
1. Run the WG511U Smart Wireless Wizard.
a. Make sure the WG511U software is installed and the WG511U is fully inserted in your
PC.
b. Open the configuration utility by clicking on the WG511U icon on the Windows
desktop or in the system tray. The Settings tab page opens.
2. Configure the Network Name (SSID) settings.
Enter the SSID. This is also called the Wireless Network Name.
Tip: Click the Networks tab to view a list of the available wireless networks and their SSIDs.
Page view 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 94 95

Comments to this Manuals

No comments