Netgear Double 108 Mbps Wireless PC Card WG511U User Manual Page 41

  • Download
  • Add to my manuals
  • Print
  • Page
    / 95
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 40
User’s Manual for the NETGEAR Double 108 Mbps Wireless PC Card 32-bit CardBus WG511U
Netgear Smart Wireless Wizard 4-7
August 2004
a. On the Windows taskbar click the Start button, and then click Run.
b. Assuming the target PC is configured with 192.168.0.1 as its IP address, type ping -t
192.168.0.1
and then click OK.
c. This will cause a continuous ping to be sent to the device with the 192.168.0.1 static IP
address. The ping response should change to “reply.”
At this point the connection is established.
Note: If you cannot connect, see the “Troubleshooting” on page 3-14. Also, for problems with
accessing network resources, the Windows Client and File and Print Sharing software might
not be installed and configured properly on your computers. Please refer to “Preparing Your
Computers for TCP/IP Networking” on page C-1.
What’s on the Statistics Page?
The Statistics page provides real time and historical trend information on the data traffic and
performance of your wireless adapter.
Transmit/Receive Performance (%): A real time graph identifying the total, receive, and
transmit utilization as a percentage the total possible.
Total/Receive/Transmit Graph: Identifies the trend of transmit/receive data communications
over time.
Transmit Statistics: Identifies transmit megabits per second (Mbps), transmit packets per
second (Tx Packets/s), total transmitted packets, and transmit errors.
Receive Statistics: Identifies receive megabits per second (Mbps), receive packets per second
(Rx Packets/s), total received packets, and received errors.
Page view 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 94 95

Comments to this Manuals

No comments