Netgear Double 108 Mbps Wireless PC Card WG511U User Manual download pdf (Page 29)

User’s Manual for the NETGEAR Double 108 Mbps Wireless PC Card 32-bit CardBus WG511U

Basic Setup 3-11

August 2004

Verify wireless connectivity to your network.

a. Verify that your Connection and Status Monitor information matches your wireless

network.

b. Check the two LEDs on the WG511U:

c. Verify connectivity to the Internet or network resources.

Note: If you are unable to connect, see troubleshooting tips in the Basic Installation section of

the Reference Manual on the NETGEAR Double 108 Mbps Wireless PC Card 32-bit CardBus

WG511U Resource CD.

Table 3-2: LED Descriptions

LED 1

(below the

word

NETGEAR

on the left)

LED 2

(below the

word

NETGEAR

on the right)

Meaning

Slow blink OFF Power save mode (default from power up or reset)

Alternate

blink

Alternate

blink

Looking for network association

Power LED goes ON; Network LED is OFF; then Power

LED goes OFF and Network LED goes ON

Slow blink Slow blink Associated or joined with network; no activity

Fast blink Fast blink Associated or joined with network; blink rate increases

with activity on the network over the air or locally on the

network

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 94 95

No comments

Netgear Double 108 Mbps Wireless PC Card WG511U User Manual Page 29