Netgear ADSL Firewall Router DG834 User Manual Page 45

  • Download
  • Add to my manuals
  • Print
  • Page
    / 236
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 44
Protecting Your Network 4-1
202-10005-05, June 2005
Chapter 4
Protecting Your Network
This chapter describes how to use the basic firewall features of the DG834 ADSL Firewall Router
to protect your network.
Protecting Access to Your DG834 ADSL Firewall Router
For security reasons, the router has its own user name and password. Also, after a period of
inactivity for a set length of time, the administrator login will automatically disconnect. When
prompted, enter admin for the router User Name and password for the router Password. You can
use procedures below to change the router's password and the amount of time for the
administrators login timeout.
Note: The user name and password are not the same as any user name or password your may use
to log in to your Internet connection.
NETGEAR recommends that you change this password to a more secure password. The ideal
password should contain no dictionary words from any language, and should be a mixture of both
upper and lower case letters, numbers, and symbols. Your password can be up to 30 characters.
How to Change the Built-In Password
1. Log in to the router at its default LAN address of http://192.168.0.1 with its default User Name
of admin, default password of password, or using whatever Password and LAN address you
have chosen for the router.
Figure 4-1: Log in to the router
2.
From the Main Menu of the browser interface, under the Maintenance heading, select Set
Password to bring up the menu shown in Figure 4-2.
Page view 44
1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 235 236

Comments to this Manuals

No comments