Netgear ADSL Firewall Router DG834 User Manual Page 226

  • Download
  • Add to my manuals
  • Print
  • Page
    / 236
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 225
Reference Manual for the ADSL Firewall Router DG834
E-26 NETGEAR VPN Configuration
202-10005-05, June 2005
c. Type ping -t 192.168.0.1, and then click OK.
Figure E-23: Running a ping test to the LAN from the PC
This will cause a continuous ping to be sent to the VPN router. After between several
seconds and two minutes, the ping response should change from timed out to reply.
Figure E-24: Ping test results
Once the connection is established, you can open the browser of the PC and enter the LAN IP
address of the VPN router. After a short wait, you should see the login screen of the VPN router
(unless another PC already has the VPN router management interface open).
Note: You can use the VPN router diagnostic utilities to test the VPN connection from the VPN
router to the client PC. Run ping tests from the Diagnostics link of the VPN router main menu.
Monitoring the VPN Tunnel (Telecommuter Example)
Viewing the PC Client’s Connection Monitor and Log Viewer
To view information on the progress and status of the VPN client connection, open the DG834
ADSL Firewall Router Log Viewer.
1. To launch this function, click on the Windows Start button, then select Programs, then
DG834 ADSL Firewall Router, then Log Viewer.
Page view 225
1 2 ... 221 222 223 224 225 226 227 228 229 230 231 ... 235 236

Comments to this Manuals

No comments