Netgear ADSL Firewall Router DG834 User Manual Page 116

  • Download
  • Add to my manuals
  • Print
  • Page
    / 236
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 115
Reference Manual for the ADSL Firewall Router DG834
7-26 Virtual Private Networking (Advanced Feature)
202-10005-05, June 2005
6.
Repeat for the DG834 on LAN B and pay special attention to use the following network
settings as appropriate.
WAN IP of the remote VPN gateway (e.g., 14.15.16.17)
LAN IP settings of the remote VPN gateway:
IP Address (e.g, 192.168.0.1)
Subnet Mask (e.g., 255.255.255.0)
Preshared Key (e.g., 12345678)
7. Use the VPN Status screen to activate the VPN tunnel by performing the following steps:
a. Open the DG834 management interface and click on VPN Status to get the VPN Status/
Log screen (Figure 7-28).
Figure 7-28: VPN Status/Log Screen
b.
Click on VPN Status (Figure 7-30) to get the Current VPN Tunnels (SAs) screen
(Figure 7-29). Click on Connect for the VPN tunnel you want to activate.
Note: The VPN Status screen is only one of three ways to active a VPN tunnel. See
“Activating a VPN Tunnel” on page 7-27 for information on the other ways.
Page view 115
1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 235 236

Comments to this Manuals

No comments