Netgear ADSL Firewall Router DG834 User Manual Page 108

  • Download
  • Add to my manuals
  • Print
  • Page
    / 236
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 107
Reference Manual for the ADSL Firewall Router DG834
7-18 Virtual Private Networking (Advanced Feature)
202-10005-05, June 2005
8.
Check the VPN Connection.
To check the VPN Connection, you can initiate a request from the remote PC to the DG834’s
network by using the “Connect” option in the NETGEAR ProSafe menu bar. The NETGEAR
ProSafe client will report the results of the attempt to connect. Since the remote PC has a
dynamically assigned WAN IP address, it must initiate the request.
To perform a ping test using our example, start from the remote PC:
a. Establish an Internet connection from the PC.
b. On the Windows taskbar, click the Start button, and then click Run.
c. Type ping -t 192.168.3.1 , and then click OK.
Figure 7-16: Running a Ping test to the LAN from the PC
This will cause a continuous ping to be sent to the first DG834. After between several
seconds and two minutes, the ping response should change from “timed out” to “reply.”
Figure 7-17: Ping test results
Once the connection is established, you can open the browser of the PC and enter the LAN IP
address of the remote DG834. After a short wait, you should see the login screen of the Router
(unless another PC already has the DG834 management interface open).
Page view 107
1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 235 236

Comments to this Manuals

No comments