Netgear 108 Mbps Wireless Media Router WGT634U User Manual download pdf

Start Here

Follow these instructions to set up your router.

Verify That Basic Requirements Are Met

Assure that the following requirements are met:

• You have your broadband Internet service settings handy.

• The networking settings of the computer are set to obtain an IP address

automatically. For instructions on how to do this, please see the animated

tutorials on the Model WGT634U Resource CD for Windows computers or the

Reference Manual on the CD for Macintosh computers.

First, Connect the Router to the Internet

1. CONNECT THE ROUTER BETWEEN YOUR PC & MODEM

a. Turn off your computer and cable or DSL modem.

b. Disconnect the Ethernet cable (A) which connects from your computer to the

cable or DSL modem.

c. Securely insert the Ethernet cable from your cable or DSL modem into the

Internet port (B) on the WGT634U.

d. Securely insert one end of the Ethernet cable that came with your router into

a LAN port on the router such as LAN port 4 (C), and the other end into the

Ethernet port of your computer (D).

2. RESTART YOUR NETWORK IN THE CORRECT SEQUENCE

Warning: Failure to restart your network in the correct sequence could prevent

you from connecting to the Internet.

a. First, turn on the cable or DSL modem and wait 2 minutes.

b. Now, turn on your router.

c. Last, turn on your computer.

Note: If a dialup or network connection usually logs you in to the Internet on

startup, do not run that software or cancel it if it starts automatically.

Check the status lights and verify the following:

• Power: The power light goes on when you turn the router on.

• LAN: A LAN light on the router such as the one for LAN port 4 is lit. If no

LAN lights are lit, check that the Ethernet cable connecting the powered on

computer to the router is securely attached at both ends.

• Internet: The Internet light on the router is lit. If the Internet light is not lit,

make sure the Ethernet cable is securely attached to the router Internet port

and the powered on modem.

3. LOG IN TO THE ROUTER

a. From your PC, launch a browser such as Internet Explorer or Netscape

Navigator.

b. Connect to the router by typing http://192.168.1.1 in the address field.

c. Enter admin for the router user name and password for the router password,

both in lower case letters.

d. After logging in to the router, you will see a Firmware Upgrade prompt. Skip

the upgrade this time by clicking the No button. Use the Setup Wizard first

to connect to the Internet.

Broadband modem

/$13RUW

BROADANDMODEM

Power

Internet Port

LAN Port 4

1 2 3 4 5

Summary of Contents

Page 1 - Start Here

Start HereFollow these instructions to set up your router.Verify That Basic Requirements Are MetAssure that the following requirements are met:• You h

Page 2 - Office Network

4. RUN THE SETUP WIZARD TO CONNECT TO THE INTERNETa. You are now connected to the router. If you do not see the menu above, click the Setup Wizard lin

Page 3 - Troubleshooting Tips

Accessing the USB Drive from My Network PlacesYou can use Windows Network Neighborhood or Network Connections to view files on the USB drive locally.

Page 4 - Technical Support

2. In the field provided, type command and click OK.3. In the DOS window, you can view your current IP settings by typing ipconfig.4. Release your cur

Page 5

Comments to this Manuals

No comments

Netgear 108 Mbps Wireless Media Router WGT634U User Manual

Browse online or download User Manual for Hardware Netgear 108 Mbps Wireless Media Router WGT634U. NETGEAR 108 Mbps Wireless Media Router WGT634U User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Hardware Netgear 108 Mbps Wireless Media Router WGT634U