Netgear FVS336G-300NAS Specifications Page 92

  • Download
  • Add to my manuals
  • Print
  • Page
    / 693
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 91
Configure the IPv6 Internet and WAN Settings
92
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
Status. The status of the WAN interface (UP or DOWN).
WAN IP. The IPv6 address of the WAN interface.
Action. The Edit button provides access to the WAN IPv6 ISP Settings screen (see
Step 8) for the corresponding WAN interface; the Status button provides access to
the Connection Status screen (see Step 13) for the corresponding WAN interface.
8. In the IPv6 WAN Settings table, click the Edit button for the WAN interface for which you
want to let the VPN firewall automatically configure the connection to the Internet.
The WAN IPv6 ISP Settings screen displays. The following figure shows the WAN2 IPv6
ISP Settings screen as an example.
9. In the Internet Address section, from the IPv6 menu, select DHCPv6.
10. In the DHCPv6 section, select a radio button:
Stateless Address Auto Configuration. The VPN firewall generates its own IP
address by using a combination of locally available information and router
advertisements but receives DNS server information from the ISP DHCPv6 server.
Stateful Address Auto Configuration. The VPN firewall obtains an interface
address, configuration information such as DNS server information, and other
parameters from the ISP DHCPv6 server. The IP address is a dynamic address.
11. If you selected the Stateless Address Auto Configuration radio button, you can select the
Prefix Delegation check box as described below:
Page view 91
1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 692 693

Comments to this Manuals

No comments