Netgear FVS336G-300NAS Specifications Page 77

  • Download
  • Add to my manuals
  • Print
  • Page
    / 693
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 76
Configure the IPv4 Internet and WAN Settings
77
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
9. Click the Apply button.
Your settings are saved. The profile is added to the List of QoS Profiles table on the QoS
screen.
You are now ready to enable WAN QoS and select the rate control QoS type (see Enable
WAN QoS and Select the WAN QoS Type on page 80).
Congestion Priority From the menu, select the priority queue that determines the allocation of
excess bandwidth and the classification level of the packets among other
priority queues on the VPN firewall:
Default. Traffic is mapped based on the ToS field in the packet’s IP header.
High. This queue includes the following DSCP values: AF41, AF42, AF43,
AF44, and CS4.
Medium-high. This queue includes the following DSCP values: AF31,
AF32, AF33, AF34, and CS3.
Medium. This queue includes the following DSCP values: AF21, AF22,
AF23, AF24, and CS2.
Low. This queue includes the following DSCP values: AF11, AF12, AF13,
AF14, CS1, 0, and all other values.
Hosts From the menu, select the IP address, range of IP addresses, or group to which
the profile is applied, and, if applicable, specify how the bandwidth is allocated:
Single IP Address. The profile is applied to a single IP address. Enter the
address in the Start IP field.
IP Address Range. The profile is applied to an IP address range. Enter the
first address of the range in the Start IP field and the last address of the
range in the End IP field. From the Bandwidth Allocation menu, select
how the bandwidth is allocated:
- Shared. The bandwidth is shared among all IP addresses the range.
- Individual. The bandwidth is allocated to each IP address in the range.
Group. The profile is applied to a LAN group. From the Select Group
menu, select the LAN group to which the profile is applied. For information
about LAN groups, see
Manage IPv4 LAN Groups and Hosts on page 133.
From the Bandwidth Allocation menu, select how the bandwidth is
allocated:
- Shared. The bandwidth is shared among all members of a group.
- Individual. The bandwidth is allocated to each member of a group.
Outbound Minimum
Bandwidth
Enter the minimum outbound bandwidth in Kbps that is allocated to the host.
Outbound Maximum
Bandwidth
Enter the maximum outbound bandwidth in Kbps that is allocated to the host.
Inbound Minimum
Bandwidth
Enter the minimum inbound bandwidth in Kbps that is allocated to the host.
Inbound Maximum
Bandwidth
Enter the maximum inbound bandwidth in Kbps that is allocated to the host.
Diffserv QoS Remark Enter a DSCP value in the range of 0 through 63. Packets are marked with this
value. Leave this field blank to disable packet marking.
Setting Description
Page view 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 692 693

Comments to this Manuals

No comments