Netgear FVS336G-300NAS Specifications download pdf (Page 52)

100

101

Configure the IPv4 Internet and WAN Settings

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3

The NETGEAR Configuration Manager Login screen displays.

3. In the Username field, type your user name and in the Password / Passcode field, type

your password.

For the default administrative account, the default user name is admin and the default

password is password.

4. If you changed the default domain or were assigned a domain, from the Domain menu,

select the domain.

If you did not change the domain or were not assigned a domain, leave the menu

selection at geardomain.

5. Click the Login button.

The Router Status screen displays.

6. Select Network Configuration > Protocol Binding.

The Protocol Bindings screen displays. The following figure shows two examples in the

Protocol Bindings table.

The Protocol Bindings table displays the following fields:

• Check box. Allows you to select the protocol binding rule in the table.

• Status icon. Indicates the status of the protocol binding rule:

- Green circle. The protocol binding rule is enabled.

- Gray circle. The protocol binding rule is disabled.

• Service. The service or protocol for which the protocol binding rule is set up.

• Local Gateway. The WAN interface to which the service or protocol is bound.

• Source Network. The computers or groups on your network that are covered by the

protocol binding rule.

• Destination Network. The Internet locations (based on their IP address) or groups

that are covered by the protocol binding rule.

• Action. The Edit button, which provides access to the Edit Protocol Binding screen

for the corresponding service.

7. Click the Add button below the Protocol Binding table.

The Add Protocol Binding screen displays.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 692 693

Comments to this Manuals

No comments

Netgear FVS336G-300NAS Specifications Page 52

Comments to this Manuals