Netgear FVS336G-300NAS Specifications download pdf (Page 410)

100

101

Set Up Virtual Private Networking With IPSec Connections

410

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3

12. Click the Save button.

Your settings are saved. Continue the Mode Config configuration of the VPN client with

the global parameters.

13. Click Global Parameters in the left column of the Configuration Panel screen. The Global

Parameters pane displays in the Configuration Panel screen:

Remote LAN address The address that you must enter depends on whether you specified a local IP

address for the Mode Config record on the VPN firewall:

• If you did not specify a local IP address for the Mode Config record, enter the

VPN firewall’s default LAN IP address in the Remote LAN Address field as

the remote host address that opens the VPN tunnel. For example, enter

192.168.1.1.

• If you specified a local IP address for the Mode Config record, enter that

address in the Remote LAN Address field as the remote host address that

opens the VPN tunnel.

For more information about the local LAN address for the Mode Config record,

see Configure Mode Config Operation on the VPN Firewall on page 398,

specifically the description of the Local IP Address field on the Add Mode

Config Record screen.

Subnet mask The address that you must enter depends on whether you specified a local subnet

mask for the Mode Config record on the VPN firewall:

• If you did not specify a local subnet mask for the Mode Config record, in the

Subnet mask field, enter the VPN firewall’s default LAN subnet mask. For

example, enter 255.255.255.0.

• If you specified a local subnet mask for the Mode Config record, in the Subnet

mask field, enter that subnet mask.

For more information about the local subnet mask for the Mode Config record,

see Configure Mode Config Operation on the VPN Firewall on page 398,

specifically the description of the Local Subnet Mask field on the Add Mode

Config Record screen.

Encryption From the menu, select 3DES as the encryption algorithm.

Authentication From the menu, select SHA-1 as the authentication algorithm.

Mode From the menu, select Tunnel as the encapsulation mode.

PFS and Group Select the PFS check box and from the menu, select the DH2 (1024) key group.

Note: On the VPN firewall, this key group is referred to as Diffie-Hellman Group 2

(1024 bit).

Setting Description

1 2 ... 405 406 407 408 409 410 411 412 413 414 415 ... 692 693

Comments to this Manuals

No comments

Netgear FVS336G-300NAS Specifications Page 410

Comments to this Manuals