Netgear FVS336G-300NAS Specifications Page 409

  • Download
  • Add to my manuals
  • Print
  • Page
    / 693
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 408
Set Up Virtual Private Networking With IPSec Connections
409
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
9. In the tree list pane of the Configuration Panel screen, right-click the GW_ModeConfig
authentication phase name and select New Phase 2.
10. Change the name of the IPSec configuration (the default is Tunnel):
a. Right-click the IPSec configuration name.
b. Select Rename.
c. Type Tunnel_ModeConfig.
d. Click anywhere in the tree list pane.
Note: This is the name for the IPSec configuration that is used only for the
VPN client, not during IPSec negotiation. You can view and change
this name in the tree list pane. This name must be a unique name.
The IPSec pane displays in the Configuration Panel screen, with the IPSec tab selected
by default:
11. Specify the settings that are described in the following table.
Setting Description
VPN Client address This field is masked out because Mode Config is selected. After an IPSec
connection is established, the IP address that is issued by the VPN firewall displays
in this field (see Test the Mode Config Connection on page 411).
Address Type From the menu, select Subnet address.
Page view 408
1 2 ... 404 405 406 407 408 409 410 411 412 413 414 ... 692 693

Comments to this Manuals

No comments