Netgear FVS336G-300NAS Specifications download pdf (Page 401)

100

101

Set Up Virtual Private Networking With IPSec Connections

401

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3

9. Click the Apply button.

Your settings are saved. The new Mode Config record is added to the List of Mode Config

Records table.

Continue the Mode Config configuration procedure by configuring an IKE policy. (You can

also change an existing IKE policy.)

10. Select VPN > IPSec VPN.

The IPSec VPN submenu tabs display with the IKE Policies screen for IPv4 in view.

11. To add an IKE policy for IPv6 instead of IPv4, in the upper right, select the IPv6 radio button.

The IKE Policies screen for IPv6 displays.

12. Under the List of IKE Policies table, click the Add button.

The Add IKE Policy screen displays. The Add IKE Policy screen for IPv4 is identical to the

Add IKE Policy screen for IPv6.

Note: You can configure an IPv6 IKE policy to assign IPv4 addresses to

clients, but you cannot assign IPv6 addresses to clients.

Integrity Algorithm From the menu, select the algorithm to be used in the VPN header for the

authentication process:

• SHA-1. Hash algorithm that produces a 160-bit digest. This is the default

setting.

• MD5. Hash algorithm that produces a 128-bit digest.

Local IP Address The local IP address to which remote VPN clients have access. If you do not specify

a local IP address, the VPN firewall’s default LAN IP address is used (by default,

192.168.1.1).

Local Subnet Mask The local subnet mask. Typically, this is 255.255.255.0.

Note: If you do not specify a local IP address, you do not need to specify a subnet

either.

Setting Description

1 2 ... 396 397 398 399 400 401 402 403 404 405 406 ... 692 693

Comments to this Manuals

No comments

Netgear FVS336G-300NAS Specifications Page 401

Comments to this Manuals