Netgear FVS336G-300NAS Specifications Page 395

  • Download
  • Add to my manuals
  • Print
  • Page
    / 693
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 394
Set Up Virtual Private Networking With IPSec Connections
395
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
c. In the List of VPN policies table, select the VPN policy that is associated with the
IKE policy that you changed.
d. Click the Enable button.
The VPN policy is reenabled. The gray circle to the left of the VPN policy turns green.
RADIUS
Remote Authentication Dial In User Service (RADIUS, RFC 2865) is a protocol for managing
authentication, authorization, and accounting (AAA) of multiple users in a network. A
RADIUS server stores a database of user information and can validate a user at the request
of a gateway or server in the network when a user requests access to network resources.
During the establishment of a VPN connection, the VPN gateway can interrupt the process
with an XAUTH request. At that point, the remote user must provide authentication
information such as a user name and password or some encrypted response using the user
name and password information. The gateway then attempts to verify this information first
against a local user database (if RADIUS-PAP is enabled) and then by relaying the
information to a central authentication server such as a RADIUS server.
After you configure the RADIUS servers for the VPN firewall’s RADIUS client (see Configure
the RADIUS Servers for the VPN Firewall’s RADIUS Client on page 395), you can select the
RADIUS authentication protocol (PAP or CHAP) when you add or change an IKE policy. For
more information, see
Manually Add an IKE Policy on page 371 and Change an IKE Policy
on page 378.
Configure the RADIUS Servers for the VPN Firewall’s RADIUS
Client
The following procedure describes how to configure the primary and backup RADIUS servers
for the VPN firewall’s RADIUS client, which is used for extended authentication.
To configure primary and backup RADIUS servers for the VPN firewall’s RADIUS
client:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
Page view 394
1 2 ... 390 391 392 393 394 395 396 397 398 399 400 ... 692 693

Comments to this Manuals

No comments