Netgear FVS336G-300NAS Specifications Page 374

  • Download
  • Add to my manuals
  • Print
  • Page
    / 693
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 373
Set Up Virtual Private Networking With IPSec Connections
374
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
Setting Description
Mode Config Record
Do you want to use
Mode Config Record?
Specify whether the IKE policy uses a Mode Config record. For information about
how to define a Mode Config record, see Mode Config Overview on page 397.
Select a radio button:
No. If you did not define a Mode Config record, leave the No radio button
selected, which disables Mode Config for this IKE policy. This is the default
setting.
Yes. If you defined a Mode Config record and want to use it for this IKE policy,
select the Yes radio button. From the Select Mode Config Record menu,
select a Mode Config record, which allows the VPN firewall to assign IP
addresses to remote VPN clients.
Because Mode Config functions only in Aggressive mode, selecting the Yes
radio button sets the tunnel exchange mode to Aggressive mode and disables
the Main mode. Mode Config also requires that both the local and remote
endpoints are defined by their FQDNs.
Note: You can use an IPv6 IKE policy to assign IPv4 addresses to clients through
a Mode Config record but you cannot assign IPv6 addresses to clients.
Select Mode Config
Record
From the menu, select one of the Mode Config records that you defined (see
Configure Mode Config Operation on the VPN Firewall on page 398).
Note: Click the View Selected button to open the Selected Mode Config Record
Details pop-up screen.
General
Policy Name A descriptive name of the IKE policy for identification and management purposes.
Note: The name is not supplied to the remote VPN endpoint.
Direction / Type From the menu, select the connection method for the VPN firewall:
Initiator. The VPN firewall initiates the connection to the remote endpoint.
Responder. The VPN firewall responds only to an IKE request from the
remote endpoint.
Both. The VPN firewall can both initiate a connection to the remote endpoint
and respond to an IKE request from the remote endpoint.
Exchange Mode From the menu, select the mode of exchange between the VPN firewall and the
remote VPN endpoint:
Main. This mode is slower than the Aggressive mode but more secure.
Aggressive. This mode is faster than the Main mode but less secure.
Local
Select Local Gateway Select a WAN interface from the menu to specify the WAN interface for the local
gateway.
Page view 373
1 2 ... 369 370 371 372 373 374 375 376 377 378 379 ... 692 693

Comments to this Manuals

No comments