Netgear FVS336G-300NAS Specifications Page 36

  • Download
  • Add to my manuals
  • Print
  • Page
    / 693
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 35
Configure the IPv4 Internet and WAN Settings
36
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
The Connection Status screen shows a valid IP address and gateway. You are
connected to the Internet. For more information about the connection status, see
View
the WAN Port Status and Terminate or Establish the Internet Connection on
page 598.
If the configuration was not successful, try to manually configure the connection. For
more information, see the following sections:
Manually Configure a Static IPv4 Internet Connection on page 36
Manually Configure a PPPoE IPv4 Internet Connection on page 39
Manually Configure a PPTP IPv4 Internet Connection on page 44
Manually Configure a Static IPv4 Internet Connection
To configure a static IPv4 Internet connection, enter the IPv4 address information that your
IPv4 ISP gave you. If you do not have this information, contact your IPv4 ISP. For each WAN
interface, you need the following information: IP address, IP subnet mask, and IP addresses
of the gateway, primary DNS server, and secondary DNS server.
Note: If your ISP requires MAC authentication and another MAC address was
previously registered with your ISP, you must configure that MAC address
on the VPN firewall (see
Change the Advertised MAC Address of the VPN
Firewall) before you begin the following procedure.
To manually configure and verify a static IPv4 Internet connection for a WAN interface:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
Page view 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 692 693

Comments to this Manuals

No comments