Netgear FVS336G-300NAS Specifications Page 35

  • Download
  • Add to my manuals
  • Print
  • Page
    / 693
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 34
Configure the IPv4 Internet and WAN Settings
35
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
8. Click the Auto Detect button.
The autodetect process probes the WAN port for a range of connection methods and
suggests one that your ISP is most likely to support.
The autodetect process returns one of the following results:
If the autodetect process is successful, a status bar at the top of the screen displays
the results (for example, DHCP service detected).
If the autodetect process senses a dynamic DHCP, PPPoE, or PPTP connection that
requires input from you, it prompts you for the information. With auto detection, it can
detect if it is a static line. Then the user needs to enter a static IP address.
The following table lists the settings that you might have to enter:
If the autodetect process does not find a connection, you are prompted either to
check the physical connection between your VPN firewall and the cable, DSL line, or
satellite or wireless Internet dish, or to check your VPN firewall’s MAC address (see
Managing Advanced WAN Options on page 66).
9. Verify the connection:
a. Select Network Configuration > WAN Settings > WAN Setup.
The WAN Setup screen displays the IPv4 settings (see the figure that is shown in
Step 6).
b. In the IPv4 WAN Settings table, click the Status button for the WAN interface for
which you want to display the connection status.
The Connection Status pop-up screen displays. The following figure shows a static IP
address configuration.
Connection Method Data You Might Have to Enter Manually
Dynamic DHCP Client Identifier. If your ISP requires client identifier information to assign
an IP address using DHCP, select the Client Identifier check box and
enter the client identifier information in the field.
Vendor Class Identifier. If your ISP requires the vendor class identifier
information to assign an IP address using DHCP, select the Vendor Class
Identifier check box.
PPPoE Login
Password
Account Name
Domain Name
PPTP Login
Password
Account Name
Domain Name
My IP Address
Server IP Address
Page view 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 692 693

Comments to this Manuals

No comments