Netgear FVS336G-300NAS Specifications Page 242

  • Download
  • Add to my manuals
  • Print
  • Page
    / 693
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 241
Customize Firewall Protection
242
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
The following table lists the menus that apply to an IPv4 DMZ WAN inbound rule.
9. Click the Apply button.
Your settings are saved. The new rule is added to the Inbound Services table on the DMZ
WAN Rules screen.
Add an IPv6 DMZ WAN Inbound Rule
The following procedure describes how to add an IPv6 DMZ WAN inbound rule.
To add an IPv6 DMZ WAN inbound rule:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
Menus that apply to all IPv4 DMZ WAN inbound
rules
Menus that apply only when your selection from
the Action menu is not BLOCK always
Service Select Schedule
Note: This menu is available only when the selection
from the Action menu includes by schedule.
Action Send to DMZ Server
WAN Destination IP Address Translate to Port Number
DMZ Users
Note: This menu is available only when the WAN
mode is Classical Routing. When the WAN mode is
NAT, your network presents only one IP address to
the Internet.
QoS Profile
WAN Users
Log
Page view 241
1 2 ... 237 238 239 240 241 242 243 244 245 246 247 ... 692 693

Comments to this Manuals

No comments