Netgear FVS336G-300NAS Specifications Page 220

  • Download
  • Add to my manuals
  • Print
  • Page
    / 693
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 219
Customize Firewall Protection
220
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
WAN Destination IP
Address
The setting that determines the destination IP address applicable
to incoming traffic. This is the public IP address that maps to the
internal LAN server.
This can be either the address of the WAN interface or another
public IP address.
You can also enter an address range. Enter the required
addresses in the Start and Finish fields to apply the rule to a
range of devices.
IPv4 LAN WAN rules
IPv4 DMZ WAN rules
LAN Users These settings apply to a LAN WAN inbound rule when the WAN
mode is classical routing and determine which computers on
your network are covered by this rule. The options are as
follows:
Any. All computers and devices on your LAN are covered by
this rule.
Single address. Enter the required address in the Start field
to apply the rule to a single device on your LAN.
Address range. Enter the required addresses in the Start
and Finish fields to apply the rule to a range of devices.
Group. Select the LAN group to which the rule applies. For
information about assigning devices to groups, see
Manage
the Network Database on page 134. Groups apply only to
IPv4 rules.
IP Group. Select the IP group to which the rule applies. For
information about assigning IP addresses to groups, see
Manage IP Address Groups on page 290.
Note: For IPv4 LAN WAN inbound rules, this field does not apply
when the WAN mode is NAT because your network presents only
one IP address to the Internet.
LAN WAN rules
LAN DMZ rules
WAN Users The settings that determine which Internet locations are covered
by the rule, based on their IP address. The options are as
follows:
Any. All Internet IP addresses are covered by this rule.
Single address. Enter the required address in the Start
field.
Address range. Enter the required addresses in the Start
and Finish fields.
IP Group. Select the IP group to which the rule applies. For
information about assigning IP addresses to groups, see
Manage IP Address Groups on page 290.
LAN WAN rules
DMZ WAN rules
Table 6. Inbound rules overview (continued)
Setting Description Inbound Rules
Page view 219
1 2 ... 215 216 217 218 219 220 221 222 223 224 225 ... 692 693

Comments to this Manuals

No comments