Netgear FVS336G-300NAS Specifications Page 123

  • Download
  • Add to my manuals
  • Print
  • Page
    / 693
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 122
Configure the IPv4 LAN Settings
123
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
8. Enter the settings as described in the following table.
Setting Description
VLAN Profile
Profile Name Enter a unique name for the VLAN profile.
VLAN ID Enter a unique ID number for the VLAN profile. No two VLANs can have the same
VLAN ID number.
Note: You can enter VLAN IDs from 2 to 4089. VLAN ID 1 is reserved for the
default VLAN; VLAN ID 4094 is reserved for the DMZ interface.
Port Membership
Port 1, Port 2, Port 3,
Port 4 / DMZ
Select one, several, or all port check boxes to make the ports members of this
VLAN.
Note: A port that is defined as a member of a VLAN profile can send and receive
data frames that are tagged with the VLAN ID.
IP Setup
IP Address Enter the IP address of the VPN firewall (the factory default address is
192.168.1.1).
Note: Ensure that the LAN port IP address and DMZ port IP address are in
different subnets.
Note: If you change the LAN IP address of the VLAN while connected through the
browser to the VLAN, you are disconnected. You then must open a new connection
to the new IP address and log in again. For example, if you change the default IP
address 192.168.1.1 to 10.0.0.1, you now must enter https://10.0.0.1 in your
browser to reconnect to the web management interface.
Subnet Mask Enter the IP subnet mask. The subnet mask specifies the network number portion
of an IP address. Based on the IP address that you assign, the VPN firewall
automatically calculates the subnet mask. Unless you are implementing
subnetting, use 255.255.255.0 as the subnet mask (computed by the VPN
firewall).
DHCP
Select one of the following radio buttons:
Disable DHCP Server. If another device in the LAN functions as the Dynamic Host Configuration
Protocol (DHCP) server for the VLAN, or if you intend to manually configure the network settings of all
computers in the VLAN, select the Disable DHCP Server radio button to disable the DHCP server.
Except for the default VLAN for which the DHCP server is enabled, this is the default setting.
Enable DHCP Server. To enable the VPN firewall to function as the DHCP server for the VLAN, select
the Enable DHCP Server radio button. (For the default VLAN, the DHCP server is enabled by default.)
Complete the Start IP Address, End IP Address, and Lease Time fields. The Domain Name, Primary
DNS Server, Secondary DNS Server, and WINS Server fields are optional, as is the Enable LDAP
information check box and associated fields.
DHCP Relay. To use a DHCP server somewhere else in your network as the DHCP server for the
VLAN, select the DHCP Relay radio button. In the Relay Gateway field, enter the IP address of the
DHCP server.
Domain Name This setting is optional. Enter the domain name of the VPN firewall.
Page view 122
1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 692 693

Comments to this Manuals

No comments