Netgear FVS336G-300NAS Specifications Page 118

  • Download
  • Add to my manuals
  • Print
  • Page
    / 693
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 117
Configure the IPv4 LAN Settings
118
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
To assign VLAN profiles to LAN ports:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > LAN Settings.
The LAN submenu tabs display, with the LAN Setup screen in view, displaying the IPv4
settings. The following figure shows some VLAN profiles as an example.
For each VLAN profile, the following fields display in the VLAN Profiles table:
Check box. Allows you to select the VLAN profile in the table.
Status icon. Indicates the status of the VLAN profile:
- Green circle. The VLAN profile is enabled.
- Gray circle. The VLAN profile is disabled.
Profile Name. The unique name assigned to the VLAN profile.
Page view 117
1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 692 693

Comments to this Manuals

No comments