Netgear ME103 User Manual Page 68

  • Download
  • Add to my manuals
  • Print
  • Page
    / 118
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 67
Reference Manual for the ME103 802.11b ProSafe Wireless Access Point
6-4 Troubleshooting
August 2003
If the PCs are configured correctly, but still not working, ensure that the ME103 is connected
and turned on. Connect to it and check its settings. If you cannot connect to it, check the LAN
and power connections.
If the ME103 is configured correctly, check your Internet connection (DSL/Cable modem etc.)
to make sure that it is working correctly.
Using the Reset Button to Restore Factory Default Settings
The Reset button (see “ME103 Wireless Access Point Rear Panel” on page 2-7) has two functions:
Reboot. When pressed and released quickly, the ME103 will reboot (restart).
Reset to Factory Defaults. This button can also be used to clear ALL data and restore ALL
settings to the factory default values.
To clear all data and restore the factory default values:
1. Power off the ME103 and power it back on.
2. Use something with a small point, such as a pen, to press the Reset button in and hold it in for
at least 5 seconds.
3. Release the Reset button.
The factory default configuration has now been restored, and the ME103 is ready for use.
Page view 67
1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 117 118

Comments to this Manuals

No comments