Netgear WPN824EXT Setup Guide download pdf (Page 40)

RangeMax WiFi Range Extender Setup Manual

36 Default Configuration

v1.0, March 2008

Restoring the Default User Name and Password

You can restore the factory default configuration settings that reset the extender’s user name to

admin, the password to password, and the IP address to 192.168.1.250. This procedure erases

your current configuration, including your wireless security settings, and restores the factory

defaults. When you log in after resetting, the Smart Wizard configuration assistant prompts you to

configure these settings.

To restore the factory default configuration settings:

Use a sharp object such as a pen or a paper clip to press and hold the restore factory settings

button, located on the rear panel of the extender, for about 20 seconds (see “Extender Back

Panel” on page 4).

2. Release the restore factory settings button and wait for the extender to reboot.

The factory default settings are restored so that you can access the extender from your web

browser using the factory defaults.

1 2 ... 35 36 37 38 39 40 41 42 43 44

No comments

Netgear WPN824EXT Setup Guide Page 40