Netgear DGFV338 ProSafe User Manual download pdf (Page 2)

January 2007

NETGEAR and the NETGEAR logo are registered trademarks of NETGEAR, Inc. in the United States and/or

other countries.

Other brand and product names are trademarks or registered trademarks of their respective holders. Information

is subject to change without notice.

Configure the WAN Mode

The WAN ports of the wireless ADSL gateway can be configured for either a Dedicated

ADSL or a Dedicated Ethernet port connection. (If both ADSL and Ethernet WAN ports

have been connected and configured, Auto-Rollover should be selected.)

1. Select Network Configuration from the main menu and WAN Mode from the

submenu. The WAN Mode screen will display. Select the option that matches your

WAN port connection and ISP setup configuration.

2. Click Apply to accept the remaining default settings. (If you need to make further

modifications, please see the reference manual.)

Now, Configure Wireless Connectivity

1. Select Network Configuration from the main menu and Wireless Settings from the

submenu. The Wireless Settings screen will display.

2. Enter the name or SSID of your wireless network. The default is NETGEAR.

3. Select the correct Country/Region setting so that you are sure to comply with local

regulatory requirements.

4. Select the appropriate Channel (Auto is the default) and Operating Mode for your

area (g and b is the default).

5. Check the Enable Wireless Access Point radio button to turn on the wireless radio and

check the Allow Broadcast of Name (SSID)

6. Configure the Wireless Security settings according to the requirements of your

network.

7. Click Apply to save your settings.

Verify wireless connectivity. Connect to the Internet or log in to the DGFV338 from a

computer with a wireless adapter that is configured to match the settings you just applied

to your DGFV338. For wireless connectivity problems, see the Troubleshooting Tips

below or in the DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router

Reference Manual. A documentation link to the manual is available on the Resource CD

or from the main menu of the user interface.

Troubleshooting Tips

Here are some tips for correcting common problems you may encounter.

Be sure to restart your network in this sequence:

1. Turn off and unplug the modem (if applicable), turn off the DGFV338, and shut down

the computer.

2. Plug in and turn on the modem (if applicable). Wait two minutes.

3. Turn on the DGFV338. Wait one minute.

4. Turn on the computer.

Make sure the network cables are securely plugged in.

• The 10/100 Internet status light on the wireless ADSL gateway will be lit if the

Ethernet cable to the wireless ADSL gateway from the modem is plugged in securely

and the modem and wireless ADSL gateway are turned on.

• The DSL Internet status light on the wireless ADSL gateway will be lit if the phone

cable to the ADSL outlet is plugged in securely, the wireless ADSL gateway turned

on and synchronized to the ADSL network.

• For each powered on computer connected to the wireless ADSL gateway with a

securely plugged in Ethernet cable, the corresponding wireless ADSL gateway LAN

port status light will be lit. The front of the DGFV338 identifies the number of each

LAN port.

Make sure your physical connection, WAN Setup and WAN

Mode match.

• If you initially set up your DGFV338 with a DSL phone connection, then the

matching ADSL ISP must be selected and configured from the WAN Setup menu and

Dedicated ADSL selected from the WAN Mode menu.

• If you are connected through an Ethernet modem, you must select Ethernet ISP to

configure your ISP settings and select Dedicated Ethernet on your WAN Mode menu.

• If you connected both, make sure you configured both ISP settings and selected

Rollover Mode in the Wireless Mode settings.

Make sure the network settings of the computer are correct.

Computers should be configured to obtain IP addresses automatically via DHCP. For help

with this, please see the links in the appendix of the Reference Manual.

Use the DGFV338 status lights to verify correct operation.

If the DGFV338 Test light does not go out within two minutes of turning the router on,

reset the router as described in the Reference Manual.

Make sure the computer & DGFV338 wireless settings match

exactly.

The Wireless Network Name (SSID) and security settings (WEP/WPA, MAC access

control list) of the DGFV338 and wireless computer must match exactly.

Technical Support

Thank you for selecting NETGEAR products.

After completing the Smart Wizard configuration assistant, locate the serial number on the

bottom label of your product and use it to register your product at

http://www.NETGEAR.com/register.

Registration on the web site or over the phone is required before you can use our

telephone support service. The phone numbers for worldwide regional customer support

centers are on the Warranty and Support Information card that came with your product.

Go to http://kbserver.netgear.com for product updates and web support.

This symbol was placed in accordance with the European Union Directive 2002/

96 on the Waste Electrical and Electronic Equipment (the WEEE Directive). If

disposed of within the European Union, this product should be treated and

recycled in accordance with the laws of your jurisdiction implementing the

WEEE Directive.

1 2

Comments to this Manuals

No comments

Netgear DGFV338 ProSafe User Manual Page 2

Comments to this Manuals

Related products and manuals for Gateways/controllers Netgear DGFV338 ProSafe