Netgear ProSafe GS108A User Manual download pdf (Page 6)

Install the Switch and Connect the

Other Devices

1. Place the switch on a flat surface or hook onto the screws.

2. For each device, insert one end of an Ethernet cable into the port in the device and insert

the other end into one of the Ethernet ports on the switch.

3. Connect the power adapter’s cord into the back of the switch and then plug the adapter

into a power source (such as a wall socket or power strip).

The Power light should light up.

The corresponding Link LED for each

connected and powered device should

light when connected and flash when

activity occurs. If the connection is 10

Mbps or 100 Mbps, one of the LEDs

in the RJ-45 jack will light up. If the

connection is 1000 Mbps, then both of the LED's in the RJ-45 jack will light up.

Note: If any light doesn’t operate as indicated, go to the

Troubleshooting

section.

12VDC 1.2A

87654321

LOCAL

10/100M

INTERNET

OFF ON

DSL

modem

Apple G4 PC with

GA311

Adapter

Server with GA311

Adapter

GS108A ProSafe 8-Port 10/100/1000 Mbps

Gigabit Ethernet Switch

FVS318 ProSafe VPN Firewall

GS108A ProSafe 8-Port 10/100/1000 Mbps

Gigabit Ethernet Switch

Power

100M

LED

10M

LED

Both=1000M

GS108

1 2 3 4 5 6 7 8

No comments

Netgear ProSafe GS108A User Manual Page 6