Netgear WG121 User Manual download pdf (Page 65)

User Manual for the NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG121

Preparing Your PCs for Network Access C-3

a. Click the Add button.

b. Select Client, and then click Add.

c. Select Microsoft.

d. Select File and Print Sharing for Microsoft Networks, and then click OK.

3. Restart your PC for the changes to take effect.

Enabling DHCP to Automatically Configure TCP/IP Settings in

Windows 98 and Me

After the TCP/IP protocol components are installed, each PC must be assigned specific

information about itself and resources that are available on its network. The simplest way to

configure this information is to allow the PC to obtain the information from a DHCP server in the

network.

You will find there are many similarities in the procedures for different Windows systems

when using DHCP to configure TCP/IP.

The following steps will walk you through the configuration process for each of these

versions of Windows.

Locate your Network Neighborhood icon.

• If the Network Neighborhood icon is on the Windows desktop, position your

mouse pointer over it and right-click your mouse button.

• If the icon is not on the desktop,

• Click Start on the task bar located at the bottom left of the window.

• Choose Settings, and then Control Panel.

• Locate the Network Neighborhood icon and click on it. This will open

the Network panel as shown below.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 80 81

No comments

Netgear WG121 User Manual Page 65