Netgear 700 Series Managed Switch for Software v2.1 User Manual download pdf (Page 93)

700 Series Managed Switch User’s Guide for Software v2.1

Command Line Interface 6-3

SM-10004-02

<IP Address> = the IP address of the destination host

Exit

The exit command moves you up one level in the CLI structure. For example, when you are in

configuration mode, and the prompt looks like

FSM726(config)#. By entering exit at the

prompt, you will exit the configuration mode and be taken back to the root level, where the prompt

looks like

FSM726#. When you enter the exit command at the root level, you will return to the

CMI.

Syntax

FSM726# exit

Show

You can use the show command to view system configuration. The information that can be shown

falls into the following categories:

• DiffServ – DiffServ settings

• Interfaces – Interface status & configuration

• IP – IP information

• Mac-address-table – the MAC address table and other related items, such as aging timers and

static addresses

• Mirror – Mirroring settings

• Multimedia – IGMP settings

• Running Config – Current operating configuration

• SNMP – SNMP related information

• Spanning-Tree – the Spanning Tree topology

• System – System-related settings

• Trunking – Trunking information

• VLAN – VLAN information

DiffServ

Use the show diffserv command to view the priority associated with each DSCP value.

Syntax

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 151 152

No comments

Netgear 700 Series Managed Switch for Software v2.1 User Manual Page 93