Netgear 700 Series Managed Switch for Software v2.1 User Manual download pdf (Page 23)

700 Series Managed Switch User’s Guide for Software v2.1

Administration Console Telnet Interface 4-3

SM-10004-02

4. When the following screen appears, make sure that the port setting are as follows:

Baud Rate: 9600

Data Bits: 8

Parity: None

Stop Bits: 1

Flow Control: None

Figure 4-4: Connection Settings

5. Click OK.

The Hyper Terminal window will open and you should be connected to the switch. If you do not

get a welcome screen or a system menu, hit the return key.

When attached to the User Interface via a Telnet Session, the following must be set in order to use

the arrow keys: Under the terminal pull down menu choose Properties and make sure the VT100

Arrows option is turned on.

Introduction to the Command Menu Interface

The switch offers a Command Menu Interface (CMI), which is a menu-driven method for

managing the switch, as well as a Command Line Interface (CLI), which uses text inputs to

manage the switch. The CLI is accessed through the CMI, but is not addressed in this chapter.

Chapter 5 discusses the CLI in detail.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 151 152

No comments

Netgear 700 Series Managed Switch for Software v2.1 User Manual Page 23