Netgear 700 Series Managed Switch for Software v2.1 User Manual download pdf (Page 22)

700 Series Managed Switch User’s Guide for Software v2.1

4-2 Administration Console Telnet Interface

SM-10004-02

Examples of terminal-emulation programs include:

• Hyper Terminal, which is included with Microsoft Windows operating systems

• ZTerm for the Apple Macintosh

• TIP for UNIX workstations

This example describes how to set up the connection using a Hyper Terminal on a PC, but other

systems follow similar steps.

1. Click the Windows Start button. Select Accessories and then Communications. Hyper

Terminal should be one of the options listed in this menu. Select Hyper Terminal

2. The following screen will appear. Enter a name for this connection. In the example below, the

name of the connection is FSM726. Click OK

Figure 4-2: Connection Description

3. The following screen will appear. In the bottom, drop down box labeled Connect Using:, click

the arrow and choose the COM port

to which the switch will connect. In the example below,

COM1 is the port selected. Click OK.

Figure 4-3: COM Port Selection

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 151 152

No comments

Netgear 700 Series Managed Switch for Software v2.1 User Manual Page 22