Netgear 700 Series Managed Switch for Software v2.1 User Manual download pdf (Page 116)

700 Series Managed Switch User’s Guide for Software v2.1

6-26 Command Line Interface

SM-10004-02

FSM726(config)# system config-tftp ip <IP address>

Where

<IP address> = the IP address of the TFTP server.

Config-tftp Path/File

The config-tftp path/file command lets you configure the path and the filename of the

configuration file to be loaded/saved.

Syntax

FSM726(config)# system config-tftp path/file <path&filename>

Where

<path&filename> = the path and the filename of the file

The IP command lets you set the IP address of the switch.

Syntax

FSM726(config)# system ip <IP address>

Where

<IP address> = the IP address of the switch.

IP-Filter

The purpose of IP filtering is to prevent unauthorized personnel from gaining access to the switch.

This is accomplished by allowing only certain IP addresses to be able to access the management.

This command enables IP filtering on the switch. The No command will disable it.

Syntax

FSM726(config)# system ip-filter

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 151 152

No comments

Netgear 700 Series Managed Switch for Software v2.1 User Manual Page 116